Pseudomyopia treated with auricular point sticking combined with periocular needle-embedding therapy and prevention of true myopia: a multicenter randomized controlled trial. / è€³ç©´è´´åŽ‹è”åˆçœ¼å‘¨æ¿é’ˆæŠ€æœ¯é¢„é˜²å‡æ€§è¿‘è§†å‘çœŸæ€§è¿‘è§†è¿›å±•ï¼šå¤šä¸­å¿ƒéšæœºå¯¹ç §è¯•éªŒ.

OBJECTIVES: To observe the clinical effect and safety of auricular point sticking combined with periocular needle-embedding therapy for pseudomyopia and prevention of true myopia. METHODS: A total of 269 children with pseudomyopia were randomized into an observation group (134 cases, 2 cases dropped out) and a control group (135 cases, 5 cases dropped out). In the control group, the healthy education was provided. In the observation group, besides the intervention as the control group, the auricular point sticking was delivered at gan (CO12), pi (CO13), xin (CO15) and yan (LO5) on one ear in each treatment, combined with periocular needle-embedding technique at bilateral Cuanzhu (BL 2), Yuyao (EX-HN 4) and Sibai (ST 2). There were 2 weeks of interval after 4 weeks of treatment. One course of treatment was composed of 6 weeks and 2 courses were required. Separately, before treatment, after 6 and 12 weeks of treatment, and after 12 weeks (the 1st follow-up visit) and 24 weeks (the 2nd follow-up visit) of treatment completion, the spherical equivalent (SE), SE progression, axial length (AL) progression, accommodative amplitude (AMP), the score of the TCM symptom and the general symptom were observed in the two groups. The safety and compliance were evaluated in the two groups. RESULTS: After 6 and 12 weeks of treatment, and in the 1st and 2nd follow-up visits, SE increased when compared with that before treatment in the two groups (P<0.05), and AMP was larger than that before treatment in the observation group (P<0.05). After 12 weeks of treatment, and in the 1st and 2nd follow-up visits, the progression of SE was slower in the observation group compared with that in the control group (P<0.01, P<0.001). After 6 and 12 weeks of treatment, and in the 1st and 2nd follow-up visits, the progression of AL in the observation group was lower than that of the control group (P<0.05, P<0.01, P<0.001); and in the 1st and 2nd follow-up visits, AMP of the observation group was larger when compared with that in the control group (P<0.05, P<0.001). After 6 and 12 weeks of treatment, and in the 1st and 2nd follow-up visits, the total scores of TCM symptom and general symptom were reduced in comparison with those before treatment in the observation group (P<0.05); after 6 and 12 weeks of treatment, the total scores of TCM symptom and general symptom were lower than those before treatment in the control group (P<0.05). In the 1st and 2nd follow-up visits, the difference of the total score of TCM symptom and general symptom in the observation group was larger than that of the control group (P<0.05). In the observation group, compared with the control group, the scores for pale/dark complexion in the 1st and 2nd follow-up visits and that for lassitude in the 2nd follow-up visit were lower (P<0.05), the score for poor concentration after 12 weeks of treatment and that for poor sleep and memory in the 2nd follow-up visit were lower (P<0.05). There were no adverse reactions in the two groups. The compliance was 98.5% in the observation group and was 96.3% in the control group, without statistical difference (P>0.05). CONCLUSIONS: On the basis of health education, auricular point sticking combined with periocular needle-embedding therapy can effectively prevent from true myopia, control the increase of SE, delay the growth of AL and improve AMP in children with pseudomyopia. This compound therapeutic regimen can relieve the general symptom and comprehensively prevent from myopia through multiple approaches, with high safety and satisfactory compliance.

A novel biopsy scheme for prostate cancer: targeted and regional systematic biopsy.

PURPOSE: To explore a novel biopsy scheme for prostate cancer (PCa), and test the detection rate and pathological agreement of standard systematic (SB) + targeted (TB) biopsy and novel biopsy scheme. METHODS: Positive needles were collected from 194 patients who underwent SB + TB (STB) followed by radical prostatectomy (RP). Our novel biopsy scheme, targeted and regional systematic biopsy (TrSB) was defined as TB + regional SB (4 SB-needles closest to the TB-needles). The McNemar test was utilized to compare the detection rate performance for clinical significant PCa (csPCa) and clinical insignificant PCa (ciPCa). Moreover, the accuracy, positive predictive value (PPV) and negative predictive value (NPV) were investigated. The agreement between the different biopsy schemes grade group (GG) and RP GG were assessed. The concordance between the biopsy and the RP GG was evaluated using weighted κ coefficient analyses. RESULTS: In this study, the overall detection rate for csPCa was 83.5% (162 of 194) when SB and TB were combined. TrSB showed better NPV than TB (97.0% vs. 74.4%). Comparing to STB, the TB-detection rate of csPCa had a significant difference (p < 0.01), while TrSB showed no significant difference (p > 0.999). For ciPCa, the overall detection rate was 16.5% (32 of 194). TrSB showed better PPV (96.6% vs. 83.3%) and NPV (97.6% vs. 92.9%) than TB. Comparing to STB, the detection rate of both schemes showed no significant difference (p = 0.077 and p = 0.375). All three schemes GG showed poor agreement with RP GG (TB: 43.3%, TrSB: 46.4%, STB: 45.9%). Using weighted κ, all three schemes showed no difference (TB: 0.48, TrSB: 0.51, STB: 0.51). In our subgroup analysis (PI-RADS = 4/5, n = 154), all three schemes almost showed no difference (Weighted κ: TB-0.50, TrSB-0.51, STB-0.50). CONCLUSION: Our novel biopsy scheme TrSB (TB + 4 closest SB needles) may reduce 8 cores of biopsy compared with STB (standard SB + TB), which also showed better csPCa detection rate than TB only, but the same as STB. The pathological agreement between three different biopsy schemes (TB/TrSB/STB) GG and RP GG showed no difference.

An integrated wearable differential microneedle array for continuous glucose monitoring in interstitial fluids.

Monitoring biomarkers in human interstitial fluids (ISF) using microneedle sensors has been extensively studied. However, most of the previous studies were limited to simple in vitro demonstrations and lacked system integration and analytical performance. Here we report a miniaturized, high-precision, fully integrated wearable electrochemical microneedle sensing device that works with a customized smartphone application to wirelessly and in real-time monitor glucose in human ISF. A microneedle array fabrication method is proposed which enables multiple individually addressable, regionally separated sensing electrodes on a single microneedle system. As a demonstration, a glucose sensor and a differential sensor are integrated in a single sensing patch. The differential sensing electrodes can eliminate common-mode interference signals, thus significantly improving the detection accuracy. The basic mechanism of microneedle penetration into the skin was analyzed using the finite element method (FEM). By optimizing the structure of the microneedle, the puncture efficiency was improved while the puncture force was reduced. The electrochemical properties, biocompatibility, and system stability of the microneedle sensing device were characterized before human application. The test results were closely correlated with the gold standard (blood). The platform can be used not only for glucose detection, but also for various ISF biomarkers, and it expands the potential of microneedle technology in wearable sensing.

Swellable microneedle-coupled light-addressable photoelectrochemical sensor for in-situ tracking of multiple pesticides pollution in vivo.

In vivo monitoring of multiple pesticide contamination is of great significance for evaluating the health risks of different pesticides, agricultural production safety, and ecological and environmental assessment. Here, we report a hydrogel microneedle array coupled light-addressable photoelectrochemical sensor for tracking multiple pesticide uptake and elimination in living animals and plants, holding three prominent merits: i) enables in-situ detection of in vivo pesticides, avoiding cumbersome and complex sample transportation and handling processes; ii) allows repeated in vivo sampling of the same organism, improving tracking test controllability and accuracy; iii) avoids lethal sampling, providing a better understanding of the pesticides fate in living organisms. The coupled sensor is mechanically robust for withstanding more than 0.35 N per needle and highly swellable (800 %) for timely extraction of sufficient in vivo solution for analysis. For proof-of-concept, it achieves in-situ detection of atrazine, acetamiprid, and carbendazim efficiently and quantitatively in artificial agarose skin models, mouse skin interstitial fluids, and plant leaves with little inflammatory reaction. This simple, highly integrated, minimally invasive, and high-throughput in vivo monitoring method is ideal for future field environmental monitoring and plant and animal disease diagnosis.

Minoxidil Nanosuspension-Loaded Dissolved Microneedles for Hair Regrowth.

Minoxidil (MIN) is used topically to treat alopecia. However, its low absorption limits its use, warranting a new strategy to enhance its delivery into skin layers. The objective of this study was to evaluate the dermal delivery of MIN by utilizing dissolved microneedles (MNs) loaded with MIN nanosuspension (MIN-NS) for hair regrowth. MIN-NS was prepared by the solvent-antisolvent precipitation technique. The particle size of MIN-NS was 226.7 ± 9.3 nm with a polydispersity index of 0.29 ± 0.17 and a zeta potential of -29.97 ± 1.23 mV. An optimized formulation of MIN-NS was selected, freeze-dried, and loaded into MNs fabricated with sodium carboxymethyl cellulose (Na CMC) polymeric solutions (MIN-NS-loaded MNs). MNs were evaluated for morphology, dissolution rate, skin insertion, drug content, mechanical properties, ex vivo permeation, in vivo, and stability studies. MNs, prepared with 14% Na CMC, were able to withstand a compression force of 32 N for 30 s, penetrate Parafilm M® sheet at a depth of 374-504 µm, and dissolve completely in the skin within 30 min with MIN %recovery of 95.1 ± 6.5%. The release of MIN from MIN-NS-loaded MNs was controlled for 24 h. MIN-NS-loaded MNs were able to maintain their mechanical properties and chemical stability for 4 weeks, when kept at different storage conditions. The in vivo study of the freeze-dried MIN-NS and MIN-NS-loaded MNs proved hair regrowth on rat skin after 11 and 7 days, respectively. These results showed that MIN-NS-loaded MNs could potentially improve the dermal delivery of MIN through the skin to treat alopecia.

[Rapamycin and HPPH Co-Loaded Nanodrug Delivered via Dissolvable Microneedles to Treat Port-Wine Stains]. / å ±è½½é›·å¸•éœ‰ç´ å’Œå ‰å ‹æ´›çš„çº³ç±³è¯ç‰©å¤åˆå¯æº¶è§£å¾®é’ˆæ²»ç–—é²œçº¢æ–‘ç—£çš„å®žéªŒç ”ç©¶.

Objective: Port-wine stains are a kind of dermatological disease of congenital capillary malformation. Based on the biological characteristics of port-wine stains and the advantages of microneedle transdermal administration, we intend to construct a nanodrug co-loaded with rapamycin (RPM), an anti-angiogenesis drug, and photochlor (HPPH), a photosensitizer, and integrate the nanodrug with dissolvable microneedles (MN) to achieve anti-angiogenesis and photodynamic combination therapy for port-wine stains. Methods: First, RPM and HPPH co-loaded nanoparticles (RPM-HPPH NP) were prepared by the emulsification solvent-volatilization method, and its ability to generate reactive oxygen species (ROS) was investigated under 660 nm laser irradiation. Mouse hemangioendothelioma endothelial cells (EOMA) were used as the subjects of the study. The cellular uptake behaviors were examined by fluorescence microscopy and flow cytometry. The cytotoxicity effects of RPM-HPPH NP with or without 660 nm laser irradiation on EOMA cells were examined by MTT assays (with free RPM serving as the control). Then, hyaluronic acid (HA) dissolvable microneedles loaded with RPM-HPPH NP (RPM-HPPH NP@HA MN) were obtained by compounding the nanodrug with HA dissolvable microneedle system through the molding method. The morphological characteristics and mechanical properties of RPM-HPPH NP@HA MN were investigated by scanning electron microscope and electronic universal testing machine. The penetration ability of RPM-HPPH NP@HA MN on the skin of nude mice was evaluated by trypan blue staining and H&E staining experiment. Results: The RPM-HPPH NP prepared in the study had a particle size of 150 nm and generated large amounts of ROS under laser irradiation. At the cellular level, RPM-HPPH NP was taken up by EOMA cells in a time-dependent manner. The cytotoxicity of RPM-HPPH NP was higher than that of free RPM with or without laser irradiation. Under laser irradiation, RPM-HPPH NP exhibited stronger cytotoxic effects and the difference was statistically significant (P<0.05). The height of the needle tip of RPM-HPPH NP@HA MN was 600 µm and the mechanical property of a single needle was 0.75048 N. Trypan blue staining and HE staining showed that pressing on the microneedles could produce pores on the skin surface and penetration of the stratum corneum. Conclusion: RPM-HPPH NP@HA MN can deliver RPM-HPPH NP percutaneously to the lesion tissue and realize the synergistic treatment of port-wine stains with anti-angiogenic therapy and photodynamic therapy, providing a new strategy for the construction of nanodrug-loaded microneedle delivery system and the clinical treatment of port-wine stains.

A mechanics-based model for predicting flexible needle bending with large curvature in soft tissue.

Percutaneous insertion is one of the most common minimally invasive procedures. Compared with traditional straight rigid needles, bevel-tipped flexible needle can generate curved trajectories to avoid obstacles and sensitive organs. However, the nonlinear large deflection problem challenges the bending prediction of the needle, which dramatically influences the surgical success rate. This paper analyzed the mechanism of needle-tissue interaction, and established a mechanics-based model of the needle bending during an insertion. And then, a discretization of the bending model was adopted to accurately predict the large bending of the needle in soft tissue. Insertion experiments were conducted to validate the bending prediction model. The results showed that the large needle bending was predicted with the mean/RMSE/maximumu error of 0.42 mm / 0.26 mm / 1.08 mm, which was clinically acceptable. This proved the rationality and accuracy of the proposed model.

A novel multifunctional microneedle patch for synergistic photothermal- gas therapy against maxillofacial malignant melanoma and associated skin defects.

Considering the high recrudescence and the long-lasting unhealed large-sized wound that affect the aesthetics and cause dysfunction after resection of maxillofacial malignant skin tumors, a groundbreaking strategy is urgently needed. Photothermal therapy (PTT), which has become a complementary treatment of tumors, however, is powerless in tissue defect regeneration. Therefore, a novel multifunctional sodium nitroprusside and Fe2+ ions loaded microneedles (SNP-Fe@MNs) platform was fabricated by accomplishing desirable NIR-responsive photothermal effect while burst releasing nitric oxide (NO) after the ultraviolet radiation for the ablation of melanoma. Moreover, the steady releasing of NO in the long term by the platform can exert its angiogenic effects via upregulating multiple related pathways to promote tissue regeneration. Thus, the therapeutic dilemma caused by postoperative maxillofacial skin malignancies could be conquered through promoting tumor cell apoptosis via synergistic PTT-gas therapy and subsequent regeneration process in one step. The bio-application of SNP-Fe@MNs could be further popularized based on its ideal bioactivity and appealing features as a strategy for synergistic therapy of other tumors occurred in skin.

Photo-crosslinkable polyester microneedles as sustained drug release systems toward hypertrophic scar treatment.

Burn injuries can result in a significant inflammatory response, often leading to hypertrophic scarring (HTS). Local drug therapies e.g. corticoid injections are advised to treat HTS, although they are invasive, operator-dependent, extremely painful and do not permit extended drug release. Polymer-based microneedle (MN) arrays can offer a viable alternative to standard care, while allowing for direct, painless dermal drug delivery with tailorable drug release profile. In the current study, we synthesized photo-crosslinkable, acrylate-endcapped urethane-based poly(ε-caprolactone) (AUP-PCL) toward the fabrication of MNs. Physico-chemical characterization (1H-NMR, evaluation of swelling, gel fraction) of the developed polymer was performed and confirmed successful acrylation of PCL-diol. Subsequently, AUP-PCL, and commercially available PCL-based microneedle arrays were fabricated for comparative evaluation of the constructs. Hydrocortisone was chosen as model drug. To enhance the drug release efficiency of the MNs, Brij®35, a nonionic surfactant was exploited. The thermal properties of the MNs were evaluated via differential scanning calorimetry. Compression testing of the arrays confirmed that the MNs stay intact upon applying a load of 7 N, which correlates to the standard dermal insertion force of MNs. The drug release profile of the arrays was evaluated, suggesting that the developed PCL arrays can offer efficient drug delivery for up to two days, while the AUP-PCL arrays can provide a release up to three weeks. Finally, the insertion of MN arrays into skin samples was performed, followed by histological analysis demonstrating the AUP-PCL MNs outperforming the PCL arrays upon providing pyramidical-shaped perforations through the epidermal layer of the skin.

AUP-PCL MN arrays provide long-term transdermal drug delivery of hydrocortisoneAUP-PCL-based MN arrays provide superior drug release profiles compared to PCL MNsEffective skin penetration AUP-PCL-based MNs on skin was achieved.

Novel tetrapolar single-needle electrode for electrochemotherapy in bone cavities: Modeling, design and validation.

Electrochemotherapy is a cancer treatment in which local pulsed electric fields are delivered through electrodes. The effectiveness of the treatment depends on exposing the tumor to a threshold electric field. Electrode geometry plays an important role in the resulting electric field distribution, especially in hard-to-reach areas and deep-seated tumors. We designed and developed a novel tetrapolar single-needle electrode for proper treatment in bone cavities. In silico and in vitro experiments were performed to evaluate the electric field and electric current produced by the electrode. In addition, tomography images of a real case of nasal cavity tumor were segmented into a 3D simulation to evaluate the electrode performance in a bone cavity. The proposed electrode was validated and its operating range was set up to 650 V. In the nasal cavity tumor, we found that the electrode can produce a circular electric field of 3 mm with an electric current of 14.1 A at 500 V, which is compatible with electrochemotherapy standards and commercial equipment.

A magnetic resonance conditional robot for lumbar spinal injection: Development and preliminary validation.

PURPOSE: This work presents the design and preliminary validation of a Magnetic Resonance (MR) conditional robot for lumbar injection for the treatment of lower back pain. METHODS: This is a 4-degree-of-freedom (DOF) robot that is 200 × 230 × 130 mm3 in volume and has a mass of 0.8 kg. Its lightweight and compact features allow it to be directly affixed to patient's back, establishing a rigid connection, thus reducing positional errors caused by patient movements during treatment. RESULTS: To validate the positioning accuracy of the needle by the robot, an electromagnetic (EM) tracking system and a needle with an EM sensor embedded in the tip were used for the free space evaluation with position accuracy of 0.88 ± 0.46 mm and phantom mock insertions using the Loop-X CBCT scanner with target position accuracy of 3.62 ± 0.92 mm. CONCLUSION: Preliminary experiments demonstrated that the proposed robot showed improvements and benefits in its rotation range, flexible needle adjustment, and sensor protection compared with previous and existing systems, offering broader clinical applications.

Glucose-responsive insulin microneedle patches for long-acting delivery and release visualization.

Limited drug loading and incomplete drug release are two major obstacles that traditional polymeric microneedles (MNs) have to overcome. For smart controlled-release MNs, since drug release duration is uncertain, a clear indication of the finish of drug release is also important for patient guidance on the timing of the next dose. In this study, MN with a triple structure of a glucose-responsive shell, loaded insulin powders and a colored propelling inner core (inspired by the mechanism of osmotic pump) was innovatively constructed. The MN patch could release insulin according to blood glucose levels (BGLs) and had excellent drug loading, more complete drug release, and good drug stability, which significantly prolonged the normoglycemic time. An approximately 0.3 cm2 patch has a hypoglycemic effect on diabetic mice for up to 24 h. Moreover, the fading of the inner core could indicate the release process of the loaded drug and can help to facilitate uninterrupted closed loop therapy for patients. The designed triple MN structure is also suitable, and can be used in the design of other smart MN drug delivery systems to further improve their drug loading capacity and simultaneously achieve more complete, smart controlled and visualized drug release.

A Hollow Microneedle Equipped with a Micropillar for Improved Needle Insertion and Injection of Drug Solution.

PURPOSE: Hollow-type microneedles (hMNs) are a promising device for the effective administration of drugs into intradermal sites. Complete insertion of the needle into the skin and administration of the drug solution without leakage must be achieved to obtain bioavailability or a constant effect. In the present study, several types of hMN with or without a rounded blunt tip micropillar, which suppresses skin deformation, around a hollow needle, and the effect on successful needle insertion and administration of a drug solution was investigated. Six different types of hMNs with needle lengths of 1000, 1300, and 1500 µm with or without a micropillar were used. METHODS: Needle insertion and the disposition of a drug in rat skin were investigated. In addition, the displacement-force profile during application of hMNs was also investigated using a texture analyzer with an artificial membrane to examine needle factors affecting successful insertion and administration of a drug solution by comparing with in vivo results. RESULTS: According to the results with the drug distribution of iodine, hMN1300 with a micropillar was able to successfully inject drug solution into an intradermal site with a high success rate. In addition, the results of displacement-force profiles with an artificial membrane showed that a micropillar can be effective for depth control of the injected solution as well as the prevention of contact between the hMN pedestal and the deformed membrane. CONCLUSION: In the present study, hMN1300S showed effective solution delivery into an intradermal site. In particular, a micropillar can be effective for depth control of the injected solution as well as preventing contact between the hMN pedestal and the deformed membrane. The obtained results will help in the design and development of hMNs that ensure successful injection of an administered drug.

Cyclodextrin microneedles for the delivery of a nanoparticle-based peptide antigen vaccine.

In recent years, microneedles (MNs) have gained considerable interest in drug formulation due to their non-invasive and patient-friendly nature. Dissolving MNs have emerged as a promising approach to enhance drug delivery across the skin in a painless manner without generating sharp waste and providing the possibility for self-administration. Cyclodextrins, a group of cyclic oligosaccharides, are well-established in pharmaceutical products due to their safety and unique ability to form inclusion complexes with various drug molecules. In this manuscript, we report the development and characterization of dissolving MNs composed of cyclodextrins for intradermal delivery of a cyclodextrin-based nanoparticulate vaccine. Different cyclodextrins were tested and the most promising candidates were fabricated into MNs by micromolding. The MNs' piercing effectiveness and drug permeation across the skin were tested ex vivo. Furthermore, in vivo studies were carried out to assess the skin's tolerance to cyclodextrin-based MNs, and to evaluate the immune response using a model peptide antigen in a mouse model. The data revealed that the MNs were well-tolerated and effective, even leading to dose-sparing effects. This study highlights the potential of cyclodextrin-based dissolving MNs as a versatile platform for intradermal vaccine delivery, providing a compatible matrix for nanoparticulate formulations to enhance immune responses.

Use of the lateral arm in tomosynthesis-guided SCOUT Reflector placement procedures.

Preoperative localization procedures are important for guiding surgical excision of non-palpable findings in the breast. The SCOUT Reflector (Merit Medical, South Jordan UT, USA) is a non-wire-based localization device that has been incorporated into clinical use with great success. SCOUT Reflectors can be placed using several imaging modalities, including tomosynthesis. One drawback to SCOUT Reflector placement under tomosynthesis guidance is an inability to directly visualize the introducer needle tip, a factor that limits precision. In this brief communication, we describe the use of a lateral arm attachment for tomosynthesis guided SCOUT Reflector placement. Precise SCOUT Reflector placement can be achieved using the lateral arm due to the ability to clearly visualize the introducer needle and the SCOUT Reflector within the introducer needle bore prior to deployment.

Rizatriptan benzoate-loaded dissolving microneedle patch for management of acute migraine therapy.

In this study, dissolving microneedles (MNs) using polyvinyl alcohol (PVA) and poly (1-vinylpyrrolidone-co-vinyl acetate) (P(VP-co-VA)) as matrix materials were developed for transdermal delivery of rizatriptan benzoate (RB) for acute migraine treatment. In-vitro permeation studies were conducted to assess the feasibility of the as-fabricated dissolving MNs to release RB. Drug skin penetration were tested by Franz diffusion cells, showing an increase of the transdermal flux compared to passive diffusion due to the as-fabricated dissolving MNs having a sufficient mechanical strength to penetrate the skin and form microchannels. The pharmacological study in vivo showed that RB-loaded dissolving MNs significantly alleviated migraine-related response by up-regulating the level of 5-hydroxytryptamine (5-HT) and down-regulating the levels of calcitonin gene-related peptide (CGRP) and substance P (SP). In conclusion, the RB-loaded dissolving MNs have advantages of safety, convenience, and high efficacy over conventional administrations, laying a foundation for the transdermal drug delivery system treatment for acute migraine.

Applications and prospects of microneedles in tumor drug delivery.

As drug delivery devices, microneedles are used widely in the local administration of various drugs. Such drug-loaded microneedles are minimally invasive, almost painless, and have high drug delivery efficiency. In recent decades, with advancements in microneedle technology, an increasing number of adaptive, engineered, and intelligent microneedles have been designed to meet increasing clinical needs. This article summarizes the types, preparation materials, and preparation methods of microneedles, as well as the latest research progress in the application of microneedles in tumor drug delivery. This article also discusses the current challenges and improvement strategies in the use of microneedles for tumor drug delivery.

A Review of Recent Advances in Microneedle-Based Sensing within the Dermal ISF That Could Transform Medical Testing.

Interstitial fluid (ISF) has attracted extensive attention in an extremely wide range of areas due to its unique advantages, such as portability, high precision, comfortable operation, and superior stability. In recent years, the microneedle (MN) technique has been considered to be an excellent tool for extracting ISF because it is painless and noninvasive. Recent reports have shown that MN has good application prospects in ISF extraction. In this review, we provide comprehensive and in-depth insight into integrated MN devices for ISF detection, covering the basic structure as well as the fabrication of integrated MN devices and various applications in ISF extraction. Challenges and prospects are highlighted, with a discussion on how to transition such MN-integrated devices toward personalized healthcare monitoring systems.

TipDet: A multi-keyframe motion-aware framework for tip detection during ultrasound-guided interventions.

BACKGROUND AND OBJECTIVE: Automatic needle tip detection is important in real-time ultrasound (US) images that are utilized to guide interventional needle puncture procedures in clinical settings. However, due to the spatial indiscernibility problem caused by the severe background interferences and the tip characteristics of small size, being grayscale and indistinctive appearance patterns, tip detection in US images is challenging. METHODS: To achieve precise tip detection in US images against spatial indiscernibility, a novel multi-keyframe motion-aware framework called TipDet is proposed. It can identify tips based on their short-term spatial-temporal pattern and long-term motion pattern. In TipDet, first, an adaptive keyframe model (AKM) is proposed to decide whether a frame is informative to serve as a keyframe for long-term motion pattern learning. Second, candidate tip detection is conducted using a two-stream backbone (TSB) based on their short-term spatial-temporal pattern. Third, to further identify the true one in the candidate tips, a novel method for learning the long-term motion pattern of the tips is proposed based on the proposed optical-flow-aware multi-head cross-attention (OFA-MHCA). RESULTS: On the clinical human puncture dataset, which includes 4195 B-mode images, the experimental results show that the proposed TipDet can achieve precise tip detection against the spatial indiscernibility problem, achieving 78.7 % AP0.1:0.5 and 8.9 % improvement over the base detector at approximately 20 FPS. Moreover, a tip localization error of 1.3±0.6 % is achieved, exceeding the existing method. CONCLUSIONS: The proposed TipDet can facilitate a wider and easier application of US-guided interventional procedures by providing robust and precise needle tip localization. The codes and data are available at https://github.com/ResonWang/TipDet.